DC1DC3DC4DC6
DslaveDtermDV1Onsight


Contents
  Overview Products  
Points Summary Contact Details
     


Overview

The D-Series controls all operate in stand-alone mode or as an integral part of the Siemens Building Technologies System 600. Due to their stand-alone capability these controls are ideal for installations where BAS is not required or will be added at a later stage.

When operating in stand-alone mode the keyboard unit provides time-of-day ON / OFF switching. When BAS communications is detected, the time-of-day function is disabled. This provides both easy transition from stand-alone to BAS and convenient backup should the BAS communications be interrupted.

All control parameters are settable from the BAS system or by direct command from either the terminal unit or a PC (laptop). The PC based configuration software provides a convenient tool for commissioning purposes.

The controller variables are available to the BAS for trending, monitoring, time-of-day commanding and PPCL program use.

The two BMS Slave units have no control function but provide cost effective digital and analog points. Because these devices reside on the LAN, the connections can be remote from the BAS controller. This can result in substantial savings in materials and wiring costs.

A range of temperature sensors are supported, including the Ni 1000, the NTC 100K thermistor and the NTC 10K thermistor.


Products

For in-depth briefings on the below products - simply click on the name...

Products
  DC1T FCU Controller  
DC3 BMS Slave Unit
DC4 BMS Slave Unit
DC6 AHU Economizer Unit
DSLAVE VAV Slave Module
DTerm - Handheld Keyboard & Display Unit
DV1 VAV Controller
     


Points Summary

    Analog Inputs Analog Outputs Digital Inputs Digital Outputs  
DV1 3 0 0 3
DC3 3 2 2 4
DC4 8 4 8 8
DC5 6 4 4 8
DC6 8 4 8 8
     


CapeSoft Contact Details
  Email:  
Telephone: +27 21 715 4000
Fax: +27 21 715 2535
Post: PO Box 511, Plumstead, 7801, South Africa